View TMPA8821_168742.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
TMPA8821 Series
Application Note
DataSheet 4 U .com
www..com
TOSHIBA
2
DataSheet 4 U .com
www..com
TOSHIBA
Lead the feet description
Pin number 1 2 3 4 5 6 7 8 9 10 54 55 56 57 58 59 60 61 62 63 64 Int Int Int Int Int Int Int Int Int Int Int Int Int NC NC NC Pin Name P61 P60 P53 VSS /RESET XOUT XIN TEST VDD VSS VSS VDD P56 P52 P51 P50 P40 P20 P31 P30 P63 P64(R) P65(G) P66(B) P67(Y) P70(HD) P71(VD) P32 P33 P34(SCL0) P35(SDA0) P54 P57 CLKOUT P41~P47 P55 P62 Signal Name BAND1 BAND2 KEY VSS /RESET XOUT XIN TEST VDD VSS VSS VDD TV/AV1/AV2 SDA1 SCL1 VOLUME VT MUTE H.SYNC REMOTE POWER R G B Y HD VD VIN1/CSIN VIN0/TC4 SCL0 SDA0 AIN1/KWU1 I I/O OUT OUT IN IN OUT IN IN IN IN OUT I/O OUT OUT OUT OUT IN IN I/O OUT OUT OUT OUT IN IN OUT OUT OUT I/O IN OUT IN IN IN Logic Positive Positive Negative Negative Positive Positive Positive Positive Positive Negative Positive Negative Negative Negative Positive Positive Positive Positive Negative Positive Positive Positive Positive Positive Positive Positive Positive Positive Positive Positive Funtion BAND data output 1 BAND data output 2 Key input GND connection Reset signal input 8 MHz oscillator connection 8 MHz oscillator connection GND connection 5V power supply GND connection GND connection 5V power supply SWITCH IIC-BUS SDA1 IIC-BUS SCL1 PWM8 OUT VOLUME VT output MUTE OUTPUT Horizontal sync signal input Remote controller signal input Power control & Check, On=Hi-Z(input),Off=L(output) OSD R signal output OSD G signal output OSD B signal output OSD Y signal output OSD HD signal input OSD VD signal input SIF data output1 SIF data output2 IIC-BUS SCL0 IIC-BUS SDA0 OSD I signal output NON Connection NON Connection NON Connection
Remote control key
0x2a 0x24 SCAN 0x2b SSYS 0x25 RECALL 0x2c Factory 1 0x26 0x2d Factory 2 0x27 CALENGAR 0x2e 0x28 0x2f 0x29
3
DataSheet 4 U .com
www..com
TOSHIBA
0x1e AUDIO 0x18 0x12 V0x0c C.System 0x06 7 0x00 1 0x1f WIDE 0x19 0x13 V+ 0x20 GAME 0x1a 0x14 MUTE 0x21 FAV 0x1b 0x15 SLEEP 0x0f AV/TV 0x09 0 0x03 4 0x22 FAV SCAN 0x1c MENU 0x16 DISPLAY 0x10 P0x0a -/--/--0x04 5 0x23 0x1d Picture MENU 0x17 STEREO 0x11 P+ 0x0b POWER 0x05 6
0x0d 0x0e I/IIAudio PP 0x07 8 0x01 2 0x08 9 0x02 3
The software adjusts to try the data elucidation
TMPA8821-5UD2 Adjust to try the data watch MENU 01 MENU 0 OSD 1 OPT
int
Contents OSD Horizontal Position BIT Optional Setting 0 RUSSIAN 1ON 0OFF 1 ARABIC 1ON 0OFF 2 FRENCH 1ON 0OFF 3 TURKISH 1ON 0OFF 4 PERSIAN 1ON 0OFF 5 No sync aft, Not VT Down of AFT when No Singal (=1) 6/7 Video IF Select 00:38MHz 10: 45.75MHz 01/11: 38.9
R Cut off 00:-0.65V, 80:0V, FF:0.65V G Cut off 00:-0.65V, 80:0V, FF:0.65V B Cut off 00:-0.65V, 80:0V, FF:0.65V G Drive Gain 00:-4.5dB, 40:0dB, 7F:3.5dB B Drive Gain 00:-4.5dB, 40:0dB, 7F:3.5dB 50Hz Horizontal position
16 1F
2 RCUT 3 GCUT 4 BCUT 5 GDRV 6 BDRV 7 HPOS 8 VP50 9 HIT MENU 02 0 1 2 3 4 5 6 7 8
40 3D 55 40 40 0A 05 13
50Hz Vertical phase 50Hz Vertical size int 02 02 00 0D 03 FF 01 84 82 Contents
60Hz Horizontal position
MENU HPS VP60 HITS VLIN VSC VLIS VSS CAL BOX MENU UP BOX
60Hz Vertical phase 60Hz Vertical size
50Hz Vertical linearity 60Hz Vertical linearity 60Hz Vertical linearity Shift data of 50Hz/60Hz CAL box color
MENU UP box color
4
DataSheet 4 U .com
www..com
TOSHIBA
9 MENU DOWN BOX MENU 03 MENU 0 BAR BOX 1 GAME BOX 2 TINT BOX 3 FONT BOX 4 SYS BOX 5 SBY 6 SRY 7 RAGC 8 V01 9 V25 MENU 04 MENU int 0 V50 44 1 V100 60 2 MODE0 F4 94 int 8C 1C 00 0A 89 09 09 28 04 28 MENU DOWN box color Contents
BAR box color GAME box color
TINT box color
FONT box color
SYS MENU box color SECAM B-Y SECAM R-Y
RF AGC 00:IF mute, 01:67dBu, Volume output data when volume=1 Volume output data when volume=25 3F:107dBu
Contents
Volume output data when volume=50 Volume output data when volume=100
BIT 0/1 2 3 4 5
Contents elucidation Opening the machine postpones the hour 1use 0unused SECAM 1use 0unused 0 PAL-M/PAL-N/SECAM auto 1 BIT2=0 PAL auto Fjp_pos 1200 0100
Change the pedestal manifestation of OSD
black
hold
the
6
1use 0unused Fjp_menu_key. 0: POS Up/Down, VOL Up/Down; 1: It is the same as the direction key (0:diffrent 1:same) audio gain sw 1use Contents elucidation 0unused
3
MODE1
E3
7 BIT 0 1 2 3 4 5 6/7 BIT 0 1 2 3 4 5
4
MODE2
7E
Set 1 WOOF gain sw 1on 0off DISP Key Function. 0:Timer Display(4S); 1:Always Display TINT 1on 0off TINT polarity, input to V/C/D. 0:normal 1:invert Set 1 SHOP OUT 01BG 10I 11DK 00unused Contents elucidation Sound M .0: unused 1:use Sound I .0: unused 1:use Sound B/G .0: unused 1:use Sound D/K .0: unused 1:use PIF VCO request;0: when power on, ASM & search;1:when only power on Tuning Algorithm option 1.0: ASM doesn't judge IFLOCK with case 4;1: ASM judge IF LOCK with case 4 Tuning Algorithm option 2.0: ASM doesn't judge
5
6
DataSheet 4 U .com
www..com
TOSHIBA
Fhsync with case 4;1: ASM judge Fhsync with case 4 7 5 PDOPT0 F6 BIT 0 1 2 3
Synchronous separation level
040 136 Contents elucidation Set 0 RFAG 1:use 0:nouse AV mode RFAGC=1 AV mode RFAGC=0 Set 1 (RNP 1:open 0:close)
audio frequency solution adjusts to increase the benefit enactment
050KHz 125KHz Surround menu bar. 1:use 0:nouse Factory menu a language choice 0Chinese 1English 1on 0off 1on 0off Contents elucidation Screen saver 1on 0off LOGO 1on 0off Av sound mute (no signal). 1:use 0:nouse Set 1 Language priority display PERSIAN 001English 010Russian 011Arabic 100French 101Turkish 111Turkish 110Persian Open screen Close screen
4 5 6 7 BIT 0 1 2 3 4/5/6
6
PDOPT1
9E
7 7 VTST 9E BIT 0 1
2
Change the pedestal mute
1mute 0off Contents elucidation cfg CALENDAR and wild_screen key exchange on/off, 1:on 0:off
3 4 5 6 7 8 FLG1 7E BIT 0 1 2 3 4 5 6 7
no signal chooses the set to operate 0:no signal continue get down to choose 1:Don't choose After menu break whether return to start position 0:Don't return 1:Return GAME menu bar. 1:use 0:nouse CALENDAR menu bar. 1:use 0:nouse Set 0 Fjp_ Sanyo and Toshiba key 1Sanyo 0Toshiba Change the pedestal Black hold 1use 0unused Contents elucidation 8821stereo/Mono 0Stereo1Mono Set 0 Set 0 Child _lock 1on 0off GAME 1on 0off CALENGAR 1on 0off Set 0 search start post ion function,
6
DataSheet 4 U .com
www..com
TOSHIBA
1:now post ion 0: 0 post ion V Centering 9 VCEN 0B Sanyo key VTST BIT7 step1 PIN Electric voltage scope KEY Function elucidation KEY 4/32VDD~7/32VDD CH+ CH+ 3 IN 8/32VDD~11/32VDD CHCH12/32VDD~15/32VDD VOL+ VOL+ 16/32VDD~19/32VDD VOL- VOL20/32VDD~23/32VDD MENU MENU 24/32VDD~27/32VDD TV/AV TV/AV MENU 05 MENU int Contents 0 CNTX 7F SUB CONTRAST MAX 1 BRTC 4A SUB BRIGHT CENTER 2 COLC 45 SUB COLOR CENTER for NTSC 3 TNTC 40 SUB TINT CENTER 4 COLP 00 SUB COLOR CENTER for PAL(DIFFERENCE) 5 COLS 45 SUB COLOR CENTER for SECAM 6 DCOL 45 DVD COLOR 7 SCOL 04 SUB COLOR CENTER for DVD 8 SCNT 0B Y-SUB CONTRAST 9 CNTC 4A SUB CONTRAST CENTER MENU 06 MENU int Contents 0 CNTN 08 SUB CONTRAST MINIMUM 1 BRTX 20 SUB BRIGHT MAX(DIFFERENCE) 2 BRTN 30 SUB BRIGHT MINIMUM(DIFFERENCE) 3 COLX 3F SUB COLOR MAX(DIFFERENCE) 4 COLN 00 SUB COLOR MINIMUM 5 TNTX 28 SUB TINT MAX(DIFFERENCE) 6 TNTN 28 SUB TINT MINMUM(DIFFERENCE) 7 ST3 19 SUB SHARP CENTER NTSC3.58 in TV 8 SV3 28 SUB SHARP CENTER NTSC3.58 in VIDEO 9 ST4 28 SUB SHARP CENTER other color system in TV MENU 07 MENU int Contents 0 SV4 28 SUB SHARP CENTER other color system in VIDEO 1 SVD 28 SUB SHARP CENTER in DVD 2 ASSH 07 ASYMMETRY-SHARPNESS 3 SHPX 1A SUB SHARPNESS MAX points from Center value 4 SHPN 1A SUB SHARPNESS MIN points from Center value 5 TXCX 1F RGB Contrast data at MAX data of user contrast 6 RGCN 00 RGB Contrast data at MIN data of user contrast ABL data in detail 7 ABL 26 BIT 00:-0.17V 01:-0.35V 10:-0.50V 0/1 ABL Gain 01:-0.15V 10:-0.28V 2/3 ABL Start Point 00:0V YPL 0:Y peak limiter on,105IRE, 1: Y peak limiter off 4 RGB OSD ABL 0:ABL active for OSD 1:Inactive 5 6 Set 0 7 Set 0 A part of Video data in detail 8 DCBS 2A Bit:0/1 Black Stretch bit:4/5 OSD Contrast 9 CLT0 5D COLOR MODETV OTHER
7
DataSheet 4 U .com
www..com
TOSHIBA
MENU 08 MENU 0 CLTM 1 CLVO 2 CLVD 3 DEF 4 AKB 5 SECD int 5C 4C 5C 01 00 08 Contents COLOR MODETV M SYSTEM COLOR MODEVIDEO OTHER COLOR MODEDVD DEF MODE AKB MODE 00AKB OFF 01ACB 10ADB 11AKB SECAM MODE data in detail BIT S-ID Sens 0 1 Bell fo 0Normal enactment 1+35KHz 2 S-ID Mode 0 Horizontal 1Horizontal/ Vertical 3/4 SECAM (The choice sets up) 10: 1.8us 11 SECAM 002.2us 01: 2.0us no 5 Set 0 6 Set 0 7 Set 0 nouse nouse
SUB Brightness(DIFFERENCE) 1/2 AFC data adjustment
6 VEHT 7 HEHT 8 BRTS 9 HAFC MENU 09 MENU 0 MUTT 1 STAT 2 FLG0
06 01 00 09 int 00 00 6E
Contents
CONTRAST UP FOR SOFT MUTT CONTRAST UP FOR SOFT START
BIT 0 1 2 3 4 5 6 7
Contents elucidation Set 0 factory adjusts D Mode BPF/TOF Setup 0BPF1TOF Set 0 MIX GAIN 1HIGH GAIN 0SIF 1MHZ CONVERT GAINLOW GAIN Set 0 Set 0 Set 0 Set 0
3 4 5 6 7 8
REFP RSNS GSNS BSNS MOD STBY
00 00 00 00 00 00
REF Pulse Position R SENS G SENS B SENS
9
SVM
06
Set 0 BIT 0/1 2/3 4 5 6 7 BIT 0/1 2/3 4
VCD/IF Standby
11IF STANDBY 11V/C/D STANDBY Set 0 Set 0 Set 0 Set 0 SVM GAIN 00-6DB 010DB 10+6DB 11+12DB SVM DL 00OFF 01-100NS 10-80NS 11-60NS CO MAX 0 -0.65.+0.65 1 -0.65+0.85
8
DataSheet 4 U .com
www..com
TOSHIBA
5 6 7 MENU 10 MENU 0 SVM1 1 SVM2 2 SVM3 3 VBLK int 06 06 06 00 Set 0 Set 0 Set 0
4 5 6 7 8 9
UCOM PYNX PYNN PYXS PYNS WCTL
00 28 18 22 1E 41
Contents VSM MODEMAMORY 1CONTRAST0-49 VSM MODEMAMORY 2CONTRAST50-100 VSM MODEMAMORY 2CONTRAST0-49MAMORY 3 V BLK Start / Stop BIT 0/1 VBLK stop 50HZ/60Hz 00: 23H/22H 01: 33H/30H 10: 37H/34H 11: 41H/38H 2/3 VBLK open 50HZ/60Hz 00310H/263H 01299H/254H 10295H/250H 11291H/246H 4 Set 0 5 Set 0 6 Set 0 7 Set 0 Set 0
H.SYNC MAX in normal condition H.SYNC MIN in normal condition H.SYNC MAX in search H.SYNC MIN in search for A-PRO data setting BIT 0/1 woofer fc
00100Hz 2 3/4 5 6 7 MENU 11 MENU 0 SUR1 1 SUR2 2 SUR3 3 BASC 4 BASX 5 TREC 6 BALC 7 WOFC 8 BAS1 9 BAS2 MENU 12 MENU 0 BAS3 1 TRE1 2 TRE2 3 TRE3 4 WLF1 5 WLF2 int 06 04 07 48 72 42 40 40 CB 3C int CB 55 37 A8 CB 99
input attenuator ALS start point
01125Hz
0:0dB,
10170Hz
1:-5dB
11210Hz
00 220mv
01:
380mv
1:on
10:
525mv
11:
770mv
ALS SW 0:off, 1:on bass boost SW 0:off,
Set 0
Contents MONO SURROUND MODE STORE 1 SURROUND MODE STORE 2 SURROUND MODE
BASS Center BASS MAX TREBLE Center BALANCE Center WOOFER Center BASS data in "Music" BASS data in "News"
Bit0-6: Bass level, Bit0-6: Bass level,
bit7:Surround select.0 bit7:Surround select.0
Contents
BASS data in "Theater" Bit0-6: Bass level, bit7:Surround select.0 TREBLE data in "Music" Bit0-6: Treble level, bit7:Surround select.1 TREBLE data in "News" Bit0-6: Treble level, bit7:Surround select.1 TREBLE data in Bit0-6: Treble level, bit7:Surround select.1 Woofer data in "Music" Bit0-6: Woofer level, bit7:Woofer On/Off 1:On 0:Off Woofer data in "News" Bit0-6: Woofer level, bit7:Woofer On/Off 1:On 0:Off 9
DataSheet 4 U .com
www..com
TOSHIBA
6 WLF3 E4 02 09 00 int 04 36 00 00 00 00 00 01 58 03 int 28 A2 03 03 E1 25 88 00 07 03 int 07 1E 65 11 22 22 48 47 7 WON1 8 WON2 9 WOFF MENU 13 MENU 0 COM1 1 COM2 2 RCUTS 3 GCUTS 4 BCUTS 5 GDRVS 6 BDRVS 7 NOIS 8 AUATT 9 01 FLAG MENU 14 MENU 0 WAITTIME 1 2 3 4 5 6 7 8 9 CUR CEN CUR STEP PDSLL PDSLR PDSLT PDSLB PDSIZE PDCOLOR PDPOS
Woofer data in "Theater" Bit0-6: Woofer level, bit7:Woofer On/Off 1:On 0:Off Woofer output level For the calculation of the Woofer output value Woofer output level For the calculation of the Woofer output value. Woofer output level A Woofer output level in Woofer off.
BIT 0-2VENH data BIT 0-3VNLR data
Contents BIT 3PDSOFF data BIT4-5COR data
R CUT OFF (shift data of YUV) G CUT OFF (shift data of YUV) B CUT OFF (shift data of YUV) G DRIVE (shift data of YUV) B DRIVE (shift data of YUV)
AFC GAIN SWITCHING ON/OFF Set 58 Set 03 Contents V-MUTE WHEN POWER ON V-MUTE Time. V-MUTE=16ms*data Pull the act beginning position and the pass act be over positions Pull the minimum ambulation unit of screen of hour of act screen saver writing is left to carry the adjustment of the position screen saver writing is right to carry the adjustment of the position adjustment of the screen saver writing top end position screen saver writing descend carry the adjustment of the position LOGO Size LOGO color LOGO Position Contents LOGO position adjust RNP Range OSD Clock frequency OSD position MENU position
MENU 15 MENU 0 PDMICPOS 1 RNP 2 OSDF 3 OSDA 4 OSDM 5 OSDMA 6 CLTSE 7 CLVSE
Adjust choose position
CLT-SECAM CLV-SECAM
8821AV/TV out (pin56) Explain
MODE FLG1->bit0 TV 8821 Mono 1 8821Steoreo 0 0V
AV1 0V Hi-Z
AV2 5V 5V
DVD 0V Hi-Z
EEPROM address for auto white balance adjustment equipment :
10
DataSheet 4 U .com
www..com
TOSHIBA
EEPROM addr.
R-CUT G-CUT B-CUT G-DRIVE 22H 23H 24H 25H
TMPA8821 addr.
08H 09H 0AH 0BH 0CH
Range 00-FFH 00-FFH 00-FFH 00-7FH 00-7FH
B-DRIVE 26H TMPA8821-5UD2 IIC device address: 088H (136) EEPRON IIC device address : 0A0H (160)
Note: Choose TA1304N.did not surround a function, need to close to surround a menu, adapt in the TMPA8821 Attach: The background color of the relevant factory data item adjusts the elucidation: CAL BOX Calendar box color
MENU UP BOX MENU DOWN BOX BAR BOX GAME BOX TINT BOX FONT BOX SYS BOX 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 Menu up box color Menu down box color Bar box color Game box color tint box color Font box color System box color
color check against 0000 Black Blue Green Blue green
Red
Carmine Yellow White Translucent black Translucent blue Translucent green Translucent and blue green Translucent red Translucent carmine Translucent yellow Gray For example: CAL BOX Set 3AH Two background colors are blue and greens and translucent green
factory of TMP88215UD2 adjusts to try the method
Because TMPA8821 total line structure of the adoption IIC, the factory adjust to try the work and can complete through the appropriation remote control, the customer remote control realization adjusts to try the function 1.Enter the operation method of the factory mode
11
DataSheet 4 U .com
www..com
TOSHIBA
8821 have two kinds of methods into the factory mode: Use the factory appropriation remote control. Press the factory appropriation remote control up enter to adjust to try the S( the in common use item adjusts to try) mode towards should adjust the key of the item, can immediately. Use the common customer remote control, have to press CALENDAR, DSP and BAR keys into the mode of M in proper orderly in aly;( this mode has no signal not to shut down automatically, use ding for the production line television)Have to press BAR, DSP, SLEEP into a menu( press BAR key to stop the Vertical at this time) of factory in proper orderly in aly, press on this foundation'8' the key enters the white balance to adjust to try the menu( press BAR key to stop the Vertical at this time), press'2'+'3' the key can immediately enter to adjust to try a menu all( SLEEP: Just turn over), press DSP key to withdraw a menu of factory; Press down the volume" " key of the television continue the companion sound SET 0,.Press a" DISP" on remote control key again, the screen appears the factory mode menu. Carry on the options with the channel "+/-" key, carry on the adjustment with the volume "+/-" key. Mode of D inside include all IIC total line adjustment data, please turn over the page to pursue an adjustment. 2. Withdraw the method of the factory mode Press DISP key, power supply or control from a distance to close the television, withdraw the factory mode. Under the factory mode, press the AV/ TV key, can circulate to choose the internal signal of IC to output the mode, the inner part adjusts to try the signal to is divided into the PAL and make type of NTSC, total 16 kinds of inner parses adjust to try the signal 3. Adjust to try the method In various adjustment menus," P+"," P-" key used for the parameter item that makes selection the desire adjustment," V+"," V-" key used for the size of the enactment parameter.
TMPA8821 of LOGO can edit the function:
Can carry on the adjustment for the size, color, position, can edit two line Function elucidation: Grow to enter the LOGO editor appearance by four seconds of BAR (-/- key), the appearance divides at this time two kinds of on is an editor of LOGO: This appearance descend press V+, the V- key use come or so move, P+ the key withdraws the whole editor, the P- key is invalid, press numerical 1~9 importation character list, 0 lose the blank space; Two is a parameter to adjust( include the size, color, position) to press MENU key to cut over the second appearance, use the V+, V- cut over the different appearance parameter, use the P+, the value of the parameter of P- adjustment; Withdraw the editor of LOGO, only have to press P once in the appearance+ the key withdraw. Regulate the factory item is of PDMICPOS can with tiny adjust the LOGO position
12
DataSheet 4 U .com

▲Up To Search▲

Price & Availability of TMPA8821

	To Download TMPA8821 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .